Why does my Makita XRU15PT Trimmer motor stop running after a little use?
If your Makita Trimmer motor stops shortly after starting, it could be due to a low battery charge—recharge the battery, and replace it if recharging isn't effective. Another cause might be overheating—stop using the tool and allow it to cool down.
What to do if cutting tool and motor cannot stop on Makita XRU15PT Trimmer?
If the cutting tool and motor of your Makita Trimmer won't stop, immediately remove the battery. This issue may indicate an electric or electronic malfunction.
Why Makita XRU15PT Trimmer does not reach maximum RPM?
If your Makita Trimmer isn't reaching its maximum RPM, check if the battery is installed properly according to the manual. Also, the battery power might be dropping, so try recharging or replacing the battery. If the issue persists, the drive system may not be functioning correctly.
What to do if cutting tool does not rotate on Makita Trimmer?
If the cutting tool on your Makita Trimmer isn't rotating, stop the machine immediately! A foreign object, like a branch, may be jammed between the guard and the cutting tool. If so, remove the foreign object.
What to do if my Makita XRU15PT motor does not run?
If the motor of your Makita Trimmer doesn't start, possible causes include: the battery cartridge might not be installed—ensure it is properly installed. The battery may be under voltage—try recharging it, and if that doesn't work, replace the battery. If these steps don't resolve the issue, the drive system may not be working correctly.
What to do if Makita XRU15PT Trimmer has abnormal vibration?
If your Makita Trimmer is vibrating abnormally, stop the machine immediately! This could be because one end of the nylon cord has broken. To fix this, tap the nylon cutting head against the ground while it is rotating to feed the cord.
General| Type | String Trimmer |
|---|---|
| Motor | Brushless |
| Voltage | 18V |
| Line Diameter | .080" |
| Line Feed System | Bump & Feed |
| Battery | 18V LXT Lithium-Ion |
| Cutting Width | 15 inches |
| Speed | 6, 500 RPM |
| Spindle Size | M10 x 1.25 |
Outlines essential safety precautions and general operating rules.
Details mandatory safety gear for operator protection during use.
Covers crucial safety measures for electrical components and battery handling.
Ensures the tool is safe and ready for operation before starting.
Important safety precautions for handling and using battery cartridges.
Explains the automatic power cut-off system for tool and battery safety.
Safe operation of the switch trigger and lock-off lever to prevent accidental starts.
Emphasizes using correctly matched cutting tools and protectors for safety.
How to attach the protective guard for safety during operation.
Essential techniques for safe and effective tool operation and posture.
Identifies common issues and provides remedies for the grass trimmer.
To Next Page
