5 6
Part 2: Add Legs (Optional)
Skip adding legs if you prefer to place your base directly on a platform, bed frame, or the floor.
1. Locate leg placement locations.
2. Hand screw all legs into the bed frame until secure (do not over tighten).
3. Use the optional extension pieces for extra height.
4. Ensure the bottom of each leg has an end cap attached.
Part 3: Connect the Cords
1. With the underside of the base still visible, locate the Power Supply Cord (attached to control box), Wall Plug Cord,
and Power Supply Box.
2. Connect the Power Supply Cord to the Power Supply Box.
3. Connect the Wall Plug Cord to the Power Supply Box.
Note: Your cords are now connected, but do not plug your base into an outlet until set up is complete.
Control Box
M455 SMART ADJUSTABLE BED BASE
How to Assemble
2: 2
2: 4
Power Supply Box
Wall Plug Cord
3: 1
Power Supply
Cord
To Next Page
Loading...
