7 8
Part 4: Move into Place
1. With two to four people, lift the base by the frame (not the fabric) and turn it over.
*When lifting, be careful not to pull on the fabric or use the legs as pivot points.
2. Place the in your preferred spot.
Part 5: Complete Setup
1. Insert one end of the Retainer Bar into the slot.
2. Flex the bar slightly to slide the other end into place.
3. Plug the end of the Wall Plug Cord into the wall outlet.
4. Add included batteries to your Remote Control (find detailed remote instructions on page 11).
5. Move the base with your remote to ensure everything is working properly.
6. Place your mattress on top of the base.
M455 SMART ADJUSTABLE BED BASE
How to Assemble
5: 1
Wall Plug Cord
5: 3
Remote Control
5: 4
To Next Page
Loading...
