15
M5 – Eco CE
TR ANSPORTING
One of the amazing characteristics of the MALTECH M5-Eco plaster
sprayer is the simple handling, obtained thanks to light, but at the same
time robust, construction materials.
The MALTECH machine can be transported both complete and
dismantled into its single segments.
Useful handles have been installed on the four
sides of the machine for transporting the
complete machine without having to dismantle
the motors.
The mixing chamber, the support with the material container and the
possible cell disc will be dispatched separately when transporting the
machine in single segments.
In both cases some parts of the machine (sprayer, compressor, etc….)
must be dismantled. Refer to the instructions in the „DISMANTLING”
paragraph for this.
If a lifting device is used for transporting, the anchoring points to use are
indicated by
(A).
Fixing the anchoring points to other parts is strictly forbidden!
Use only the relative lifting points to lift the machine! Take the
weight and the dimensions of the machine into account.
If the machine is transported on a means of transport, this must
be suitably blocked! Take the weight and the dimensions of
the machine into account.
A
A
To Next Page
Loading...