To Next PageTo Next Page
Need help?Do you have a question about the maltech M5-Eco and is the answer not in the manual?
General| Brand | maltech |
|---|---|
| Model | M5-Eco |
| Category | Paint Sprayer |
| Language | English |
Guidelines for understanding and using the manual. Owner responsible for translation. Manual must be conserved in an accessible place.
Explanation of symbols used in the manual (Important, Attention, Recommendation) to convey critical information and warnings.
Pictograms on the machine indicating dangerous areas and situations. Must be kept clean and replaced if damaged.
Read and understand safety regulations. Manufacturer not responsible for modifications or incorrect use. Manual is integral part.
Always wear suitable working clothes for protection.
Wear safety shoes and helmets during all uses of the machine.
The bag-breaker is dangerous. Wear protective gloves to avoid cuts.
Only specialized personnel for electrical work. Turn off machine for faults. Connect to legal current dispensers.
Do not use water for electrical fires. Use CO2 extinguishers.
Read manual carefully. Unauthorized personnel must not perform first start-up. Check pump rotation direction.
Machine must be in perfect technical state. Check safety devices. Trained personnel only. Observe safety regulations.
Only trained adults allowed. Responsible person must document training. Check safety regulations.
Read manual. Assemble parts from pallet. Lift using designated points. Position on stable base.
Check fuses, grounded switch. Ensure stable power supply. Turn off machine for any intervention.
Explains Main switch, Cell disc selector, Start/Stop key, and Water key functions.
Procedure to check and set correct rotation direction. Use phase shifter. Avoid inverse rotation.
Adjust water flow pressure with the adjustor for desired material consistency. Micro-adjustments are key.
Fill container with dry material. Check for bag fragments. Fill mixing chamber with water before starting.
Set selector to '1' (Automatic), turn main switch 'I'. Put dry material in container. Press start key.
Turn off machine, clean to avoid incrustations. Protect electrical parts. Set cell disc to '0'.
Regular maintenance extends life. Carry out daily cleaning. Turn off machine before any intervention.
Machine must be turned off before any intervention. Contact representative for unlisted problems.
Check electricals, taps, hoses. Check water pump, pressure, filter. Apply to MALTECH assistance.
Apply to zone representative for problems. If doubts persist, contact main office.
