19
M5 – Eco CE
STARTING-UP
The procedures for starting-up the machine are described in the following
paragraph.
Positioning
Position the machine on a flat and stable base
and make sure that it cannot move by using the
brakes on the wheels.
Danger of being hurt!
The brakes on the wheels must be locked when using the
machine to give it sufficient stability.
Check that all switches, including the switch for adjusting the
direction of rotation of the machine and especially the main
switch of the machine, are deactivated before fixing the single
parts.
Electrical connection
Make sure that the fuses and switches cabinet in the building
yard is equipped with a grounded switch and a 25 A safety
device.
In addition, it is necessary to make sure that the power supply
is stable and that there are no possible rapid fluctuations of
tension. If this cannot be guaranteed, MALTECH forbids the
use of the machine and does not offer any guarantee for the
electrical parts of the machine.
The machine is equipped with a central supplier of
current
(A). The entire machine is supplied electrically
thanks to the connection to this plug.
Attention!
The machine must be turned off, disconnecting the power by
removing the plug from the socket, before any intervention
(cleaning, maintenance, repair).
A
To Next Page
Loading...