7
As a protection for your battery, the fridge/
freezer switches OFF automatically if the power
source voltage is insufcient.
Note: It is important that the correct cable size and
gauge is used for the installation of the DC supply
as over distance the voltage can decrease if the
incorrect cable size and gauge cable is being used.
Always consult a qualied automotive electrician
when using a DC extension cable.
OPERATING YOUR FRIDGE/FREEZER WITH
240V AC
Plug the 240V AC power cable into the AC
POWER socket (as circled below) on the end of
the fridge/freezer and then connect to a suitable
240V AC power source.
The fridge/freezer will automatically turn on, there
is no requirement to switch the appliance on.
The display will automatically show the current
internal cabinet temperature.
The fridge/freezer is equipped with a
multi-voltage internal power supply with priority
circuit for connecting to an AC voltage power
source of 240V.
The power input socket is tted with a 15A DC
blade and a 5A/250V glass fuse for protection.
Caution: Do not touch cables, plugs or switches
with wet hands or when your feet are in contact
with water! If you operate your fridge/freezer on
board a boat by means of a shore connection to
a 240V AC power source, the power connection
must include an earth leakage RCD residual
current device.
AC Power Cable
DC Power Cable
220-240V AC Power inlet 12-24V DC Power inlet
To Next Page
Loading...
