Need help?Do you have a question about the Manhattan 177603 and is the answer not in the manual?
General| Wavelength | 650 nm |
|---|---|
| Sensor type | Laser |
| Scanner type | 2D |
| Read rate (max) | 200 reads/s |
| Maximum scan width | 430 mm |
| Light levels (direct sunlight) | 0 - 100000 lx |
| Linear (1D) barcodes supported | Codabar, Code 11, Code 128, Code 39, Code 93, EAN 128, Industrial 2 of 5, Interleaved 2 of 5, MSI, Plessey, Telepen |
| Optical sensor resolution (W x H) | 752 x 480 pixels |
| 2D (matrix & stacked) barcodes supported | Aztec Code, Data Matrix, MaxiCode, MicroPDF417, PDF417, QR Code |
| Cable length | 1.5 m |
| Standard interfaces | USB |
| Connectivity technology | Wired |
| Input voltage | 5 V |
| Power consumption | 435 mA |
| Power source type | DC |
| Certification | FCC, CE, UL |
| Product color | Black |
| Housing material | Acrylonitrile butadiene styrene (ABS) |
| Storage temperature (T-T) | -20 - 70 °C |
| Operating temperature (T-T) | 0 - 50 °C |
| Operating relative humidity (H-H) | 20 - 95 % |
| Harmonized System (HS) code | 84716070 |
Weight and Dimensions| Depth | 193 mm |
|---|---|
| Width | 90 mm |
| Height | 72 mm |
| Weight | 135 g |
Safety precautions for cleaning, handling, and maintenance of the scanner.
Identifies key physical components and indicators of the barcode scanner.
Instructions for connecting and switching the scanner's communication cable.
Guide on how to modify scanner settings using programming codes.
Information on resetting the scanner to its original default configuration.
Explains different modes for activating the scanner's reading beam.
Configures the number of beeps for a successful barcode scan.
Sets the length of time the buzzer sounds for a successful scan.
Enables or disables the beep sound for scan errors.
Controls the beep sound during scanner configuration.
Selects between Linear and Area modes for barcode scanning.
Displays the current firmware version of the scanner.
Resets all scanner configuration parameters to their original factory defaults.
Configuration options for serial (RS232) communication.
Enables or disables specific barcode symbologies for scanning.
Sets the symbology identifier for BPO codes.
Sets the symbology identifier for Canada Post codes.
Sets the symbology identifier for Codabar codes.
Sets the symbology identifier for Codablock codes.
Sets the symbology identifier for Code 11.
Configures check digit handling for Code 11.
Sets the symbology identifier for Code 39.
Configures the character set and format for Code 39.
Configures start and stop characters for Code 39.
Sets the symbology identifier for Code 93/93i.
Sets the symbology identifier for Code 128/GS1-128.
Sets the symbology identifier for Data Matrix.
Sets the symbology identifier for Dutch Post.
Configures how EAN/UPC barcodes are read and transmitted.
Configures decoding of composite messages for GS1.
Sets the symbology identifier for GS1 Composite.
Sets the symbology identifier for GS1 Databar.
Sets the symbology identifier for Infomail.
Controls check digit verification for Interleaved 2 of 5.
Sets the symbology identifier for Japan Post.
Controls check digit transmission for Japan Post.
Sets the symbology identifier for Matrix 2 of 5.
Sets the symbology identifier for Maxicode.
Configures Mode 0 for Maxicode scanning.
Sets the symbology identifier for MicroPDF417.
Enables or disables Code 128 emulation for MicroPDF417.
Sets the symbology identifier for MSI Code.
Controls check digit verification for MSI Code.
Sets the symbology identifier for PDF417.
Enables or disables irregular PDF format for PDF417.
Configures control header transmission for PDF417.
Sets the symbology identifier for Planet.
Sets the symbology identifier for Plessey Code.
Controls check digit transmission for Plessey Code.
Sets the symbology identifier for Postnet.
Controls check digit transmission for Postnet.
Configures Model 1 control for QR Code.
Sets the symbology identifier for QR Code.
Sets the symbology identifier for Standard 2 of 5.
Configures the format (Identicon/Computer Identics) for Standard 2 of 5.
Sets the symbology identifier for Sweden Post.
Sets the symbology identifier for Telepen.
Sets the symbology identifier for TLC 39.
Controls linear transmission for TLC 39.
Configures the transmission of symbology identifiers.
Configures preamble strings for barcode data output.
Configures postamble strings for barcode data output.
Lists decimal values represented by barcodes.
Lists all supported 1D barcode symbologies and their status.
Lists all supported 2D barcode symbologies and their status.
To Next Page
