Manitou MC 50 Turbo POWERSHIFT Serie 3-E3 - Page 150

3-42
E3 - GEAR BOX OIL
DRAIN
MC 40 Turbo POWERSHIFT Série 3-E3 MC 60 Turbo POWERSHIFT Série 3-E3
MC 50 Turbo POWERSHIFT Série 3-E3 MC 70 Turbo POWERSHIFT Série 3-E3
Place the lift truck on level ground with the I.C. engine stopped, the gear box oil still warm.
DRAINING THE OIL
- Place a container under drain plug 1 (fig. E3/1) and unscrew it.
- Remove the access panel 2 (fig. E3/2).
- Remove dipstick 3 (fig. E3/3) in order to ensure proper emptying.
Dispose of the drain oil in an ecological manner.
FILLING UP THE OIL
- Refit and tighten drain plug 1 (fig. E3/1) (tightening torque 54 to 61 Nm).
- Fill up with oil (see: 3 - MAINTENANCE: LUBRICANTS AND FUEL) by filler port 4 (fig. E3/3).
- Run the I.C. engine at idle then check the level (see: 3 - MAINTENANCE: A5 - GEAR BOX OIL
LEVEL) and check for leaks.
- Refit access panel 2 (fig. E3/2).
E3/3
3
4
E3/2
2
E3/1
1
647003 EN (03/01/2012)