Manitou MRT Series - Page 10

F3
F5
9
F4
Working zone limits: the yellow icons
indicate that the zone limit has been
reached. The conguration is carried
out by setting the machine in the
required maximum position and
pressingF6toF10keys
Retrievalofspeedsfrommemory
aspercentageoftheboom
hydraulic speed
Display of attachment recognition
by machine
Conguration screen for maximum
speeds of the boom’s hydraulic
movements. Use F6 to F9 to select
the required line, and modify the value
bymovingthejoystickandvalidating
the percentage with the red button
in the right joystick. The parameters
will be displayed on F3 page.
F10 allows resetting movements
to 100%
Error diagnostics screen