Manitou MRT Series - Platform Mode

15
1
2
3
4
To change to platform mode:
1. Hang the platform to the machine coupler;
insert the locking bolt into the coupler
2. Stabilisethemachineanddonotswitchtheignition
off
3. Connect the platform’s electrical lead to the boom
head (
1
).Themachineenginestops
4. Connect the hydraulic hoses (if applicable)
5. Place the control box in its location in the platform.
Securewiththelockingsystemprovided(
3
)
6. Connect the platform’s electrical lead to the right
side of the control box (
4
)
7. Switch the control box on
8. Press the “start” green button. The horn indicates
that the machine radio-control communication is
established
9. Start the engine using the radio-control button
PLATFORM MODE
When the platform
exceeds
the load limit,
the only
movement
allowed
is the
boom retraction
DON’T
forget!
In
platform
mode,
put the joystick
gear selector
in neutral
CAUTION!