Manitou MRT Series - Special Operating Modes; Radio-Control Mode

2
14
1 2 3
2
22
3
1
RADIO-CONTROL MODE
1
Machine display screen
2
Joysticks, selector button for different
functions
3
Emergency stop button
To change to radio-control mode:
1. Start the machine
2. Stabilise the machine
3. Press the radio-control button
The engine stops
Check that the door is properly closed and the gear lever is in neutral
4. Switch the radio-control on (
1
)
5. Press the “start” green button (
2
). The horn indicates that the machine radio-control
communication is established
6. Start the engine using the radio-control button (
3
)