Manitou MSI 20 D - Page 21

1 - 15
- Bring the forks to stop in front of the load (Fig. H). Apply the parking brake
and place the forward/reverse lever in neutral.
- Slightly lift the load (1) and incline the mast (2) backwards to stabilize the
load (Fig. I).
- Manoeuvring very gently and carefully, back up the lift truck (1) to release the
load, and bring the load into the transport position (Fig. J).
LAYING A HIGH LOAD ON TYRES
- Approach the load in the transport position in front of the pile (Fig. K).
- Lift the mast (1) until the load is above the pile, and move the lift truck
forward (2) (Fig. L) manoeuvring very gently and carefully. Apply the parking
brake and place the forward/reverse lever in neutral.
H
2
1
I
1
J
1
2
L
K