2 - 26
1 - DRIVER’S SEAT
FOR OPTIMAL COMFORT, THIS SEAT CAN BE ADJUSTED IN
DIFFERENT WAYS.
LONGITUDINAL ADJUSTMENT
- Pull the locking lever 1 upwards.
- Slide the seat to the required position.
- Release the lever and ensure it returns to the lock position.
SEAT SUSPENSION ADJUSTMENT
- Pull and lift up the locking lever 2 so as to place it into one of these five
positions.
Position A : Light-weight driver (50 kg).
Position B : Intermediate.
Position C : Middle-weight driver.
Position D : Intermediate.
Position E : Heavy-weight driver (120 kg).
ANGLE ADJUSTMENT OF THE BACK-REST
- Pull the locking lever 3 backwards.
- Tilt the back-rest into one of the three possible positions.
- Release the locking lever and ensure it returns to the lock position.
ANGLE ADJUSTMENT OF THE WHOLE SEAT
- Lift up the locking lever 4.
- Tilt the seat forwards or backwards.
- Release the lever and ensure it returns to the lock position.
2 - SAFETY BELT
FROM MACHINE N° 134 092
- Sit correctly on the seat.
- Check that seat belt is not twisted.
- Place the seat belt at hip level and not across the stomach.
- Attach the seat belt and check that it locks.
- Adjust the seat belt to your body shape without squeezing your hip.
In no event should the lift truck be used if the seat belt is defective (Fixing,
locking, cuts, tears, etc.). Repair or replace the seat belt immediately.
3 - SIGNAL LAMP PANEL
When activating the electrical system of the lift truck, all the lamps and the
panel's buzzer must light to indicate their good working order. If one of the
lamps or the buzzer does not function, carry out the necessary repairs.
A - Red engine oil pressure lamp.
B - Red water temperature lamp.
C - Red hydrostatic transmission oil filter clog lamp.
1
2
4
3
E
D
C
B
A
A B C D E
F G H I J
To Next Page
Loading...
Need help?
General