2-25
6C - PANEL FOR BUTTONS AND KEYBOARD
FROM MACHINE N°: 590613 AND FOR MACHINES N°: 589029 ; 589122 ; 589165
Each time you press one of the buttons, a beep
is sounded. Apart from their main function,
the buttons numbering from 0 to 9 and the OK
button are used for entering the codes (see: 2
- DESCRIPTION: 6D - SCREEN DISPLAY).
READING SCREENS
Button for scrolling, cancelling and validating
(see: 2 - DESCRIPTION: 6D - SCREEN
DISPLAY).
“BUCKET” MODE
See: 2 - DESCRIPTION: 7 - LONGITUDINAL STABILITY LIMITER AND WARNING DEVICE.
“SUSPENDED LOAD” MODE
See: 2 - DESCRIPTION: 7 - LONGITUDINAL STABILITY LIMITER AND WARNING DEVICE.
ATTACHMENT CIRCUIT
- Press on the button to show the selection screen on the screen display. Choose the operating
mode using the scroll button and validate with the button .
- The button allows you to leave this screen and to cancel the modifications.
ATTACHMENT CIRCUIT UNLOCKED
ATTACHMENT CIRCUIT IN CONTINUOUS MODE
- When the button light is lit, this indicates that the attachment circuit is in
continuous mode.
- The adjustable hydraulic flow with button A for the backup hydraulic control appears
on the help screen. Hold button A in the same position for 2 seconds
to confirm the required hydraulic flow.
- Press the button or switch off the I.C. engine to stop the continuous
mode.
By default, the attachment circuit in continuous mode is disabled as soon as
the operator leaves the cab. This condition can be changed using the ADMIN code on the configuration screen (see: 2 -
DESCRIPTION: 6D - SCREEN DISPLAY: CONFIGURATION SCREEN: 4 > ADMIN: 4.7).
ATTACHMENT CIRCUIT UNLOCKED
It is recommended to use this function when the lift truck is not fitted with hydraulic attachment.
OPTION
TRANSMISSION MODE
- Press down the button to show the selection screen
on the screen display. Choose the
transmission mode using the scroll button and validate with the button .
- The button allows you to leave this screen and to cancel the modifications.
Classic transmission mode.
OPTION Progressive INCHING transmission mode in forward gear.
OPTION Progressive INCHING transmission mode in forward and reverse gear.
A
To Next Page
Loading...
