2-22
MAJOR FAULT WARNING LIGHT
When this light is lit up it means there is a major fault that may affect the safety for the lift truck or the driver (see: 2
- DESCRIPTION: 6D - SCREEN DISPLAY).
GREEN LIGHT FOR LOW BEAM
BLUE LIGHT FOR MAIN BEAM
I.C. ENGINE COOLANT TEMPERATURE LAMP
If the lamp comes on when the lift truck is running, stop the I.C. engine immediately and search the cooling circuit for the
cause of the malfunction.
AIR FILTER CLOGGING LAMP
The lamp comes on when the air filter cartridge is clogged up. When this lamp remains continuously lit, the cartridge needs
changing. Stop the lift truck and carry out the necessary repairs (see cleaning and replacement requirements in chapter: 3
- MAINTENANCE: SERVICING SCHEDULE).
HYDRAULIC RETURN OIL FILTER CARTRIDGE CLOGGING LAMP
The lamp come on when the hydraulic return oil filter cartridge is clogged up. When this lamp remains continuously lit
the cartridge needs changing. Stop the lift truck and carry out the necessary repairs (see cleaning and replacement
requirements in chapter: 3 - MAINTENANCE: SERVICING SCHEDULE).
NOTE: This lamp comes on by cold weather or when starting the fork lift truck, it goes off when the hydraulic oil reaches its
operating temperature.
WARNING LAMP NOT USED
BATTERY LOAD LAMP
If this lamp comes on when the lift truck is running, switch off the I.C engine immediately and check the electric circuit and
the alternator belt.
I.C. ENGINE OIL PRESSURE LAMP
If the lamp comes on when the lift truck is running, stop the I.C. engine immediately and look for the cause (see oil level
in I.C. engine crankcase).
BRAKING OIL LEVEL LAMP
If the lamp comes on, when the lift truck is running, stop the I.C. engine immediately and check the braking oil level. In the
event of an abnormal drop in the level, consult your dealer.
OPTION GREEN PROGRESSIVE INCHING TRANSMISSION MODE INDICATOR LAMP
This lamp comes on when using the PROGRESSIVE INCHING TRANSMISSION MODE (see: 2 - DESCRIPTION: 6C - PANEL FOR
BUTTONS AND KEYBOARD).
GEAR BOX OIL PRESSURE LAMP
This lamp comes on when there is an abnormal drop in gear box pressure. Stop the lift truck and look for the cause
(e.g., Low oil level in the transmission, internal leak in the transmission, etc.).
GEAR BOX OIL TEMPERATURE LAMP
This lamp comes on when the temperature of the gear box oil is abnormally high. In this case, place the forward/reverse
selector in neutral and let the I.C. engine running at idle for a few minutes. If the lamp remains on, stop the lift truck and
contact your dealer.
NOTE: Abnormal heating of the oil may be linked to an incorrect use of the gear box ratios (see: 2 - DESCRIPTION: 21 - GEAR
LEVER).
PARKING BRAKE LAMP
This lamp lights when the parking brake is applied. If the warning lamp flashes when running or stopped, this indicates that
there is an incorrect pressure in the braking circuit (e.g., insufficient pressure to release the parking brake). Contact your
dealer.
HYDRAULIC MOVEMENT NEUTRALISATION LAMP
The lamp lights when the hydraulic controls are neutralised and when a forbidden hydraulic movement is requested.
To Next Page
Loading...
