EasyManuals Logo
Home>Manitowoc>Ice Maker>MD0420A

Manitowoc MD0420A User Manual

Manitowoc MD0420A
132 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #61 background imageLoading...
Page #61 background image
Part Number 040005626 5/17 61
Safety Limit 3
If the harvest float switch hasn’t opened for 10
continuous seconds within 4 minutes of the water inlet
valve energizing the ice machine stops.
Safety Limit 3 is bypassed on the initial cycle
(manual start or after a full bin/safety limit
condition). For all subsequent cycles the ice
machine stops for 30 minutes when the water inlet
valve is energized for 4 minutes and the harvest
float valve didn’t open. Control board lights SL#1
and SL#2 will flash on/off at 1 second intervals.
The ice machine automatically restarts at the end
of the 30 minute delay period and stops flashing
the control board lights.
If 100 consecutive failures occur the ice machine
stops and the SL#1 & SL#2 lights flash on/off at 1
second intervals.
SL#1 & SL#2 will flash 3 times on startup and
automatically erase after 100 normal cycles.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Manitowoc MD0420A and is the answer not in the manual?

Manitowoc MD0420A Specifications

General IconGeneral
BrandManitowoc
ModelMD0420A
CategoryIce Maker
LanguageEnglish

Related product manuals