35
Installation and Service Manual
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION
Dispensing crushed
ice or reduced
dispensing speed.
Water spillage from ice
machine into dispenser bin.
Adjust ice maker.
Agitation timer Test agitation timer.
Bridge of ice sheet is too
thick.
Adjust ice maker.
Paddle wheel area broken or
cracked.
Replce paddle wheel area.
Ice clusters in bin. Break up or remove clusters.
Door not fully open. Adjust door.
Door will not close.
Ice jammed in chute.
Adjust bridge in ice maker or, when
manually filling, break up clusters.
Door and/or door lock has
come out of place.
Replace door and lock into proper
position.
Mounting brackets
for rocking chute
have spread too far
apart.
Bend parts into shape.
To Next Page
Loading...
Need help?
General
