EasyManuals Logo
Home>Manitowoc>Ice Maker>Q270 series

Manitowoc Q270 series User Manual

Manitowoc Q270 series
236 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #58 background imageLoading...
Page #58 background image
58 Part Number 80-01111-9 7/10
Step 12 Use 1/2 of the sanitizer/water solution to
sanitize all foodzone surfaces of the ice machine and
bin. Use a cloth or sponge to liberally apply the
solution. When sanitizing, pay particular attention to
the following areas:
Evaporator plastic parts - including top, bottom and
sides
Bin bottom, sides and top
Do not rinse the sanitized areas.
Step 13 Replace all removed components.
Step 14 Reapply power and water to the ice machine
and place the toggle switch in the WASH position.
Add the proper amount of Manitowoc Ice Machine
Sanitizer to the water trough.
Step 15 Wait until the sanitize cycle is complete
(approximately 22 minutes) then place the toggle
switch in the OFF position, disconnect power and
water supplies to the ice machine.
Step 16 Repeat step 6 to remove parts for hand
sanitizing.
Step 17 Mix a solution of sanitizer and warm water.
Model Amount of Sanitizer
QM45 1.5 ounces (45 ml)
Q130 1.6 ounces (48 ml)
Q170 2.2 ounces (66 ml)
Q210 2.2 ounces (66 ml)
Q270 1.9 ounces (57 ml)
! Warning
Disconnect el ectric po wer to the i ce
machine at th e electric sw itch box before
proceeding.
Solution
Type
Water Mixed With
Sanitizer 6 gal. (23 l) 4 oz (120 ml) sanitizer

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Manitowoc Q270 series and is the answer not in the manual?

Manitowoc Q270 series Specifications

General IconGeneral
BrandManitowoc
ModelQ270 series
CategoryIce Maker
LanguageEnglish

Related product manuals