EasyManua.ls Logo

Manitowoc RNF - Additional Model Operation Procedures

Manitowoc RNF
115 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
24 Part Number 000017542 Rev 00 8/22
Operation Section 3
RNF0620/RFF0620/RNP0620/RFP0620/
RNF1020C/RNF1100/RNP1100/RFF1200C/
RFF1300/RNF2000C/RFF2200C/RFF2500
Operation
The ice machine will not start until:
A. The rocker switch is moved to “ON”.
B. Ice does not contact the bin thermostat bulb.
C. The water reservoir is full of water.
Placing the toggle switch in the ON position starts the gear
motor. After the rotation speed sensor verifies 8 minutes of
correct rotation, the time delay ends and the compressor
starts. The ice machine will continue to make ice until ice
contacts the bin thermostat. The ice machine remains off
until ice no longer contacts the bin thermostat.
BIN THERMOSTAT IS
LOCATED ON SIDE OF
CONTROL BOX

Table of Contents

Other manuals for Manitowoc RNF

Related product manuals