EasyManua.ls Logo

Manitowoc RNS0308 - User Manual

Manitowoc RNS0308
284 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Part Number 000007661 11/16
R Model
Flake & Nugget Ice Machine
Technicians Handbook

Table of Contents

Questions and Answers

  • S
    Sean BurkeAug 8, 2025
    What to do if Hi Amps light is on in my Manitowoc RNS0308 Ice Maker?
    • J
      Jason KnappAug 8, 2025
      If the Manitowoc ice machine stops, the Hi Amps & Service lights turn on, the control board will start a delay. The ice machine will restart after a 60-minute delay if the amperage stays below 3.8 amps for six hours. If the gear motor amperage exceeds 3.8 amps a second time within six hours, you must press the control board reset button to restart the ice machine.
  • S
    shawtinaAug 17, 2025
    Why is the Lo Water light on my Manitowoc RNS0308 Ice Maker and no ice is being produced?
    • J
      Jeffery ThorntonAug 17, 2025
      If your Manitowoc ice machine stops and the Lo Water & Service lights are on, it means the control board has stopped the ice machine and energized the Lo Water & Service lights, leaving the water solenoid energized. The ice machine will resume ice making when water contacts the low water probe. This can be due to no water, low water pressure, or a defective solenoid valve or control board relay.
  • T
    Tony ObrienAug 28, 2025
    What to do if my Manitowoc Ice Maker shows Over-Torque Failure?
    • P
      Paul EllisAug 29, 2025
      If the Manitowoc ice machine stops and the 20M light is on, the PWR, WTR, and BE lights will remain on. The ice machine will restart after 20 minutes. If the restart is successful and the operation is normal, the 20M light will turn off and the 60M light will turn on. After 60 minutes of normal operation, the 60M light will turn off. If the restart is unsuccessful or the operation is abnormal, the 60M light will turn off and the 2ND light will turn on. In this case, you must press the reset button on the control board to restart the ice machine.

Summary

Installation

Maintenance

Cleaning and Sanitizing Procedures

Comprehensive guide for cleaning, sanitizing, and maintaining ice machine hygiene.

Troubleshooting

Model-Specific Troubleshooting Guides

Diagnoses and resolves operational issues for specific ice machine models.

Component Specifications

Charts

Total System Refrigerant Charge

Reference information for the total refrigerant charge for various ice machine models.

Ice Production and Operating Pressures

Guidelines for verifying correct ice production and operating refrigerant pressures.

Diagrams

Wiring Diagrams

Contains electrical wiring diagrams for various ice machine models and components.

Refrigeration Tubing Schematics

Illustrates the refrigerant flow and component layout for different ice machine models.

Manitowoc RNS0308 Specifications

General IconGeneral
BrandManitowoc
ModelRNS0308
CategoryIce Maker
LanguageEnglish

Related product manuals