Manitowoc UDE080A User Manual

Part Number 000014797 Rev02 05/18 133
Abnormal temperatures
Higher than normal freeze cycle temperatures.
• A dirty filter or condenser will result in higher than
normal temperatures. Always clean the filter and
condenser before diagnosing the refrigeration system.
• Hot water entering the ice machine will result in high
suction and discharge line temperatures in the freeze
cycle.
Capillary tube failures or low refrigerant charge will always
result in a starving evaporator.
• An obstructed capillary tube or low refrigerant charge
will have a suction line temperature higher than
normal.
• An obstructed capillary tube or low refrigerant charge
will have a discharge line temperature lower than
normal.
• An obstructed capillary tube will not effect the
discharge line temperature during the harvest cycle.
A low freeze and discharge line temperature in the
freeze cycle with a normal harvest cycle discharge line
temperature indicates an obstructed capillary tube.
• Low refrigerant charge will have both the suction and
discharge line temperatures lower than normal in the
freeze and harvest cycles.

Manitowoc UDE080A Specifications

General

Brand	Manitowoc
Model	UDE080A
Category	Ice Maker
Language	English