EasyManuals Logo
Home>Manitowoc>Ice Maker>UDE080A

Manitowoc UDE080A User Manual

Manitowoc UDE080A
260 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #26 background imageLoading...
Page #26 background image
26 Part Number 000014797 Rev02 05/18
Water Service/Drains
WATER SUPPLY
Local water conditions may require treatment of the water
to inhibit scale formation, filter sediment, and remove
chlorine odor and taste.
Important
If you are installing a Manitowoc water filter system,
refer to the Installation Instructions supplied with the
filter system for ice making water inlet connections.
n
Warning
For ice making, connect to a potable water supply only.
Water Inlet Lines
Follow these guidelines to install water inlet lines:
Do not connect the ice machine to a hot water supply.
Be sure all hot water restrictors installed for other
equipment are working. (Check valves on sink faucets,
dishwashers, etc.)
If water pressure exceeds the maximum recommended
pressure, 80 psig (5.5 bar) obtain a water pressure
regulator from your Manitowoc distributor.
Install a water shut-off valve for ice making potable
water.
Insulate water inlet lines to prevent condensation.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Manitowoc UDE080A and is the answer not in the manual?

Manitowoc UDE080A Specifications

General IconGeneral
BrandManitowoc
ModelUDE080A
CategoryIce Maker
LanguageEnglish

Related product manuals