Manitowoc UDE080A

Part Number 000014797 Rev02 05/18 91
Problem Possible Cause Correction
Ice sheet is thick
Water trough level is
too high
Adjust ice thickness float
Power button was
turned off/on during
the freeze cycle and
ice remained on the
evaporator
Allow ice to thaw
and release from the
evaporator, then restart
Ice damper was opened
and closed in the
harvest cycle before the
ice released
Allow ice to thaw
and release from the
evaporator, then restart
Long harvest cycles
with repeated safety
limit indication
Clean the ice machine
& perform diagnostic
procedures as required