USER’S MANUAL
23
Resolution
[480i]: for NTSC system TV.
[480P]: for NTSC system TV.
[576i]: for PAL system TV.
[576P]: for PAL system TV.
[720P]: for NTSC or PAL system TV.
[1080 i]: for NTSC or PAL system TV
If the video does not appear correctly, change the set-
ting. This setting is to match the most common setting for
HDMI.
TV format
If the video does not appear correctly, you need to change
the settings. This should match the most common setting
for TVs in your country.
[NTSC]: for NTSC system TV.
[PAL]: for PAL system
Video output
[CVBS]: CVBS output.
[YPBPR]: YPbPr output
Press the MENU button and select [Search Channel].
options to search channel Select an option and press button
to adjust the settings. Press the EXIT button to The Menu
provides the RIGHT/LEFT exit the Menu
Auto Search
Search and install all channels automatically. This option
overwrites all preset channels.
1.Select [Auto Search] and press the OK or RIGHT button
to start channel search.
2.To cancel channel search, press the EXIT button
Manual Search
Install new channels manually. This option adds new
channels without changing the current channels list.
1 .Select [Manual Search] then press the OK or RIGHT
button. The channel search screen will appear.
2. Press the RIGHT/LEFT button to select the channel
frequency
3. Press the OK button to start searching channels
If a channel is found, it will be saved and added to the
channels list. If channels cannot be found, it exits the menu
automatically.
Country
Select your country of residence.
Antenna power
Enable Antenna Power if an external active antenna is
connected.
In order to get a nice and stable TV signal reception, pls
set “Antenna Power” at “Off” if user uses an active Antenna,
otherwise, pls set “Antenna Power” at “On” if user uses an
passive antenna.
To Next Page
Loading...
Need help?
General
