USER’S MANUAL
25
Press the MENU button and select [System].
The menu provides options to change the system
settings.
Press the UP/DOWN button to select an option and press
the RIGHT/LEFT button to change the setting.
Press the EXIT button to exit the Menu.
You can restrict to channel access that are unsuitable
for children.
To restrict/lock the channel, you will need to enter either
the default password ‘000000’ or your own password.
Set Password
To set or change the password for locked programs. Enter
your old password or the default password ‘000000’. then
You will be asked to enter your new password. To conrm,
re-enter your new password. Once it is conrmed, press the
EXIT button to exit the Menu.
Note: if you forgot your new password, you need enter
“888888” to unlock it.
Reset your Set Top Box to the Default Factory Settings.
In Main Menu, move the cursor to RIGHT/LEFT button to
select “System” UP/DOWN button to select [Restore Factory
Default] and press the OK button. Enter your password or
the default password ‘000000’ and press OK to conrm. This
option will delete all preset channels and settings.
View model, hardware and software information.
USB
Press the MENU button and select [USB].The menu
provides options to play back Music,
Photo and Movie les, supports: MP3, WMA, JPEG, BMP,
AVI, MP4 DIVX etc. Multimedia les. The unit will only support
USB device with NTFS, FAT and FAT32 le system.
Multimedia
if no USB device plugged in, a warning message “No USB
Device is Found” will display.
- Slide Time: Press the RIGHT/LEFT button to change
slide show interval from 1-8 seconds
- Slide Mode: adjust slide show effect in mode of 0-59
seconds or random
- Aspect Ratio: display the picture at its original aspect,
Discard display the picture in full screen mode.
To Next Page
Loading...
Need help?
General
