Manta FPS-3000 - Page 9

Table 2. Basic construction of the ll station FPS-3000:
No. Part Catalogue-No.
1. Housing FPS-3001
2. Sticker FPD-3002
3. Grip attachment FPD-3003
4. Grip FPD-3004
5. Washer FPD-3005
6. Holder screw FPD-3006
7. Inlet socket FPD-3007
8. Washer FPD-3008
9. Inlet socket nut FPD-3009
10. Gauge FPD-3010
11. Pressure gauge connection FPS-3002
12. Gauge holder FPD-3012
13. O-ring FPD-3015
14. Straight connector FPD-3016
15. “S type” bending tube FPS-3003
16. Three pin switch FPD-3018
17. Single bending tube FPS-3004
18. Clamping ring FPD-3021
19. Nut FPD-3022
20. Nut FPS-3005
21. Caseback FPS-3006
22. Rubber foot FPD-3029
23. Foot screw FPD-3030
24. Washer FPD-3031
35. Nut FPD-3032
26. Blind rivet nut FPD-3033
27. Caseback screw FPD-3034
Figure 3 shows all housing components, interior nishing and the tting of its components.
In Table 2 all of the appliance’s components are listed together with their catalogue numbers.
8USER MANUAL / FPS-3000 / FPD-3000 / © 2018 MANTA / All rights reserved.