10
• Remove packing materials and unpack all parts and
lay them on a flat, stable surface.
• Make sure the delivery contents are complete and free
of any damage. If you find that parts are missing or
show damage do not use the blower but contact the
Mantis customer service center at 1-800-366-6268 for
assistance. Using an incomplete or damaged blower
represents a hazard to people and property.
• Ensure that you have all the accessories and tools
needed for assembly and operation. This also includes
suitable personal protective equipment.
The blower and the packaging are not
children’s toys! Children must not play with
plastic bags, sheets and small parts! There is
a danger of choking and suffocation!
The blower must be fully assembled before operation!
Do not use blower that is only partly assembled or
assembled with damaged parts! Follow the assembly
instructions step-by-step and use the pictures
provided as a visual guide to easily assemble
the product! Do not insert the battery before it is
completely assembled! Failure to comply could result
in accidental starting and serious personal injury.
4.
WARNING! Make sure all
7
3.
3)
4.
WARNING! Make sure all
1. Upon first unboxing the handheld blower, twist and remove the Blower Tube (B in figure above).
2.
Nested inside the Blower Tube you can find the High Pressure Nozzle Tip (C figure above). Separate Blower Tube B and
High Pressure Nozzle Tip C.
3.
Re-assemble the Blower Tube onto the main blower housing with an insert and twisting motion (1&2 in figure above).
4. Assemble the High Pressure Nozzle Tip C onto the end of the Blower tube B with an insert and twisting motion (1&2 in figure
above). Note: High Pressure Nozzle Tip C can be removed for a wider, reduced velocity air-stream.
Operator’s Manual
Before You Start
Blower Assembly
To Next Page
Loading...
Need help?
General
