17
Blower Maintenance
REPAIR
This product does not contain any parts that can be repaired by the consumer. Contact an authorized service center
or a similarly qualified person to have it checked and repaired. For assistance contact the Mantis customer service
center at 1-800-366-6268.
MAINTENANCE
Before and after each use, check the blower for wear and damage.
1. Follow the maintenance instructions for this blower. Never carry out any modifications of this product. Information
about maintenance and repair is provided in this user manual.
2. Keep all nuts, bolts,screws and attachments tight to ensure the blower is in safe working condition.
3. Make sure that air vents are not covered with debris
The use of any unauthorized replacement parts, attachments or
accessories can be dangerous and could cause injury or mechanical
damage.
Contact us at www.mantis.com
Even if you are operating this blower in accordance with all the safety requirements, potential risks of injury and
damage remain. The following dangers can arise in connection with the use of this product:
1. Health defects resulting from vibration emission if the product is being used over long periods of time or
not properly managed and maintained.
2. Injuries and damage to property due to broken components or the sudden impact of hidden objects
during use.
3. Danger of injury and property damage caused by thrown objects.
RESIDUAL RISKS
STORAGE
1. Switch the product off, wait for moving parts to stop and remove the battery from the blower.
2. Clean the blower as described above.
3. Store the blower in a sheltered, dry, frost-free, well-ventilated place.
4. When not in use, the blower should be stored indoors in a dry and high or locked-up place out of the reach of children.
Store the charger and your cordless tool only in dry locations with an ambient temperature of 50-104°F (10-40°C). Store your
lithium-ion battery pack in a cool, dry place at a temperature of 50-68°F (10-20°C). Protect the battery pack, charger and cordless
tool from humidity and direct sunlight. Only place fully charged batteries in storage (charged to at least 40%).
5. We recommend using the original package for storage or covering the blower with a suitable tarp or enclosure to protect it against dust.
TRANSPORTATION
1. Switch the blower off, wait for moving parts to stop and remove the battery.
2. Attach transportation guards, if applicable.
3. Always carry the blower by its carrying handle.
4. Protect the blower from any heavy impact or strong vibrations which may occur during transportation in vehicles.
5. Secure the blower to prevent it from slipping or falling over.
Cordless Blower Storage and Transportation
To Next Page
Loading...
Need help?
General
