Mantis 3559 - Installing the Battery

14
product off and disconnect it from power
supply before making any adjustments!
WARNING! The wheels can be adjusted in 3 different positions.
Always ensure the locked! Do not attempt
to use the product any other position or
unlocked!
WARNING!
product off and disconnect it from power
WARNING! The wheels can be adjusted in 3 different positions.
Always ensure the locked! Do not attempt
to use the product the w he e ls in any other position or
unlocked!
WARNING!
Alw ays sw itch the product off and disconnect it from power
supply before making any adjustments!
WARNING! The wheels can be adjusted in 3 different positions.
Always ensure locked! Do not attempt
to the w he e ls in any other position or
unlocked!
Installing and Removing the Battery
1. Insert the battery into the rear portion of the housing as shown above in Figure 1 until you hear an
audible click of the battery retention mechanism. Excessive force should not be required. Confirm
the orientation of the battery is as shown above if you experience difficulty inserting the battery.
2. The battery is removed by pushing the battery release lever as shown above in Figure 2.
ATTENTION!
The battery must always be fully charged before use.
Operator’s Manual