What to do if the Maquet HANAULUX blue 30 light intensity is too high or low?
If the light intensity is too high or low, the cause may be a wrong voltage supplied. To resolve this, have an electrician check the supply voltage and check the bulb, replacing it if necessary.
Why is the life cycle of the bulb too short in my Maquet HANAULUX blue 30 Medical Equipment?
A short bulb life cycle might be due to the wrong bulb(s) or a wrong voltage supplied. Check the bulb and replace it if necessary. Also, have an electrician check the supply voltage.
What to do if the Maquet HANAULUX blue 30 Medical Equipment light area is not circular?
If the light area is not circular, the cause may be wrong bulb(s), the bulb not being seated properly, or a broken main lamp. Check the bulb and replace if necessary, and check the bulb seat.
What to do if Maquet HANAULUX blue 30 handles are damaged?
If the handles are damaged, it may be due to the end of their life cycle. Replace the handles to resolve this issue.
What to do if Maquet HANAULUX blue 30 Medical Equipment colours are maladjusted?
Maladjusted colors can be caused by using the wrong bulb(s). Replace the bulb to correct this.
How to fix a Maquet HANAULUX blue 30 light that is too stiff?
If the light is too stiff, it is because the brake pressure of the light is set too tight. Adjust the brake pressure of the light head to fix this.
How to fix a Maquet HANAULUX blue 30 Medical Equipment light that is too loose?
If the light is too loose, it is because the brake pressure of the light is set too loose. Adjust the brake pressure of the light head to fix this.
What to do if the Maquet HANAULUX blue 30 Medical Equipment glass cover is scratched, frosted, or full of cracks?
If the glass cover is scratched, frosted, or full of cracks, the cause may be wrong cleaning agents or the glass being cleaned/disinfected while still hot. Use a suitable cleaning agent. The glass cover should be replaced by service.
Why is the life cycle of sterilisable handles too short for Maquet Medical Equipment?
If the life cycle of sterilizable handles is too short, the cause may be a wrong process of sterilization. Check the sterilization method.
What to do if the Maquet Medical Equipment light head lowers itself?
If the light head lowers itself, the spring pressure in the weight balancer may be too loose. Service is required to resolve this issue.
General| Brand | Maquet |
|---|---|
| Model | HANAULUX blue 30 |
| Category | Medical Equipment |
| Language | English |
Explains symbols used in the manual and on the device.
Provides general safety instructions for using the light system.
Lists the standard components of the HANAULUX blue 30/80 lighting system.
Instructions on how to position the light head safely, including warnings.
Details the light source, light distribution, and intensity.
Instructions for cleaning and disinfecting the apparatus, with warnings.
Procedure for sterilising the handles, including notes on assembly/disassembly.
Procedure for replacing the light bulb in blue 30 and blue 80 light heads.
Instructions for adjusting the brake pressure on the light head for blue 30 and blue 80 models.
List of spare parts with their identification numbers.
To Next Page