Marantz 10 - Page 42

Adjusting the tone and balance
o
Adjusting the tone
1
Press OPTION.
The option menu screen is displayed.
2
Use Cursor Up/Down buttons to select “Tone”, then
press ENTER.
3
Use Cursor Up/Down buttons to select “Bass” or
“Treble”, then press ENTER.
0
If you are using an F.C.B.S. connection, a screen for selecting the
F.C.B.S. ID (“Leader”, “Member 1”, “Member 2” or “Member 3”)
will appear after step 3. Use Cursor Up/Down buttons to select
the ID of the device you want to set, then press ENTER.
4
Use Cursor Up/Down buttons to adjust the bass or
treble volume.
Bass: –10 dB – +10 dB (Default: 0 dB)
Treble: –10 dB – +10 dB (Default: 0 dB)
0
When the input source is set to “Power Amp Balanced” or “Power Amp
Unbalanced”, the tone adjustment function does not work.
0
When the source direct mode is turned on, the tone adjustment function does
not work.
Contents
Connections Playback Settings Tips Appendix
42
Front/Top
panel
Rear panel
Remote control
unit
Index