Selecting the input source
1
Use input source select buttons (PHONO/LINE/BAL) to
select the input source to be played back.
The selected input source appears on the display.
0
This unit switches between Line 1 and Line 2 each time LINE is pressed.
0
This unit switches between Balanced 1 and Balanced 2 each time BAL is pressed.
0
You can also select the input source by using INPUT ml.
0
You can also select the input source by turning INPUT selector on the main unit.
Adjusting the volume
1
Use VOLUME no to adjust the volume.
The volume level appears on the display.
0
You can also adjust the volume by turning VOLUME on the main unit.
0
You can change how the volume level is displayed. (v p. 50)
Turning off the sound temporarily
(Muting)
1
Press :.
“Mute” is displayed on the display.
0
To cancel mute, either adjust the volume or press : again.
Contents Connections Playback Settings Tips Appendix
41
Front/Top
panel
Rear panel
Remote control
unit
Index
To Next Page
Loading...
