Need help?Do you have a question about the Marantz 3600 and is the answer not in the manual?
Describes input selection and equalization for Phono/Mic signals.
Explains the X10 amplifier's role in increasing signal level for power amplifiers.
Details the dual function of boosting/attenuating frequencies and altering turnover points.
Explains the relay's function to eliminate power-on pops.
Lists recommended equipment for tests and adjustments.
Outlines initial control settings for testing procedures.
Details the process for verifying the unit's power consumption.
Describes operational tests for inputs, outputs, and controls.
Explains how to test the maximum output voltage before clipping.
Details testing procedures for THD on AUX and Phono inputs.
Describes testing for hum and noise levels at various outputs.
Explains testing RIAA equalization and frequency response for Phono/Mic.
Details the procedure for testing channel separation at high levels.
Describes testing the 9 kHz, 5 kHz, and 30 Hz filter circuits.
Explains how to test the Bass, Mid, and Treble tone controls.
Details testing the 250 Hz and 4 kHz turnover functions.
Describes testing the volume control's tracking accuracy.
Explains testing the loudness contour circuit's frequency response.
To Next Page
General
