Marantz AV8805A - Page 261

o
Firmware
Version:
Displays information for the current
firmware.
DTS Version: Displays the current DTS version.
o
Notifications
Displays and sets notifications.
Also, sets whether or not to display the notification when the power is
turned on.
Notification Alerts
On
(Default):
Notification messages are displayed.
Off: Notification messages are not displayed.
0
Press INFO on the remote control unit to display current source name, volume,
sound mode name, and other information at the bottom of the screen.
.
AUDYSSEY
SIGNAL
EXTLFE
SB
SBRSBL
C FR
FHR SW
FL
FHL
SRSL
SBRSBL
C FRFL
SRSL
INPUT SIGNAL ACTIVE SPEAKERS
SOUND
SOURCE
FWRFWL
Dynamic EQ : On
MultEQ XT32 : Reference
Dynamic Volume : Medium
Dolby Audio - Dolby TrueHD
50.0
Dolby Audio - Dolby TrueHD
Blu-ray
Press INFO again while the information screen is displayed to display information
about video input and output signals. The FRL Rate is displayed when the “4K/8K
Signal Format” setting of this unit is “8K Enhanced” and the connected TV
supports FRL transmission mode.
.
Resolution
HDR
Color Space
Pixel Depth
FRL Rate
[Input]
8K24A
HDR10
YCbCr 4:2:2
BT.2020
12bits
40Gbps
[Output]
8K24A
HDR10
YCbCr 4:2:2
BT.2020
12bits
40Gbps
Contents
Connections Playback Settings Tips Appendix
261
Front panel Display Rear panel Remote Index