Tips
I want to switch the filter to change the desired sound quality
0
Switch the filter characteristics. (v p. 97)
I want to enjoy analog output audio at higher quality
0
Set “Digital Out” on the setup menu to “Off”. (v p. 99)
0
Press the DIMMER button to turn the display off. (v p. 89)
I want to listen to high sound performance playback
0
The network and USB flash drive playback (USB-A) functions can be stopped to prevent noise that affects the sound quality. Set “Network & USB-A” to
“Off” in the menu. (v p. 105)
0
The Wi-Fi function can be stopped to prevent noise that affects the sound quality. Set “Wi-Fi” to “Off” in the setup menu. (v p. 105)
0
Stopping Bluetooth function reduces a source of noise that affects sound quality, enabling higher sound quality playback. Set “Bluetooth” to “Off” in the
setup menu. (v p. 106)
0
You can stop the circuit that outputs audio from the analog audio output terminals (VARIABLE) of this unit. This prevents the audio signal output from
the analog audio output terminals (FIXED) from being affected. Set “Variable Out” to “Off” in the setup menu. (v p. 98)
I want to play TV audio at higher quality
0
Connect the HDMI terminal of your TV that supports the ARC function to the HDMI ARC terminal of this unit and switch the input source to HDMI.
(v p. 22)
0
If you are using a TV that does not support the ARC function or a TV that does not have an HDMI terminal, the TV audio can be played by this unit using
an Optical or Coaxial connection. (v p. 24)
0
Only 2-channel linear PCM can be input as the digital audio signal to this unit.
Contents
Connections Playback Settings Tips Appendix
112
Front panel Rear panel
Remote control
unit
Index
To Next Page
Loading...
