What to do if my Marantz M-CR603 Car Receiver cannot play iPod?
If your Marantz Car Receiver isn't playing from your iPod, ensure that the input source is set to “iPod/ USB.” Also, check that the cable is properly connected and reconnect if necessary.
What to do if my Marantz M-CR603 Car Receiver display is lit but no sound is produced?
If the display is lit but no sound comes from your Marantz Car Receiver, check the following: * Ensure the correct input source is selected. * Increase the volume to a suitable level. * Make sure the MUTING function is switched off.
How to fix Marantz M-CR603 when display not lit and sound not produced when power switched to on?
If the display isn't lit and there's no sound when you turn on your Marantz Car Receiver, the power cord might not be securely plugged in. Check the connections on the receiver's rear panel and the power plug connection to the outlet.
What to do if my Marantz Car Receiver power turns off suddenly and TIMER indicator flashes red? (Flashes at 0.25 second intervals)
If the power on your Marantz Car Receiver turns off suddenly and the TIMER indicator flashes red (at 0.25 second intervals), the set is damaged. Turn off the power and contact a Marantz service center.
What to do if my Marantz Car Receiver does not display “USB” when a USB memory device is connected?
If your Marantz Car Receiver doesn't display “USB” when a USB memory device is connected: * Check the connection. * Ensure the USB device conforms to mass storage class or MTP standards. * Connect the USB device directly to the USB port, avoiding USB hubs.
How do I fix a Marantz Car Receiver that is not operating properly?
If your Marantz Car Receiver isn't working correctly, it might be due to external noise or interference. Try resetting the microprocessor to resolve the issue.
Why is my Marantz M-CR603 display off?
If the display on your Marantz Car Receiver is off, it's likely that the Dimmer setting is set to “OFF”. Change the Dimmer setting to something other than “OFF”.
What to do if my Marantz M-CR603 cannot play a CD-R or CD-RW disc?
If your Marantz Car Receiver won't play a CD-R or CD-RW disc: * Ensure the disc has been finalized. Finalize the disc and then try playing it again. * The recording quality might be poor, or the disc itself might be of low quality. Use a properly recorded disc.
What does it mean when my Marantz Car Receiver turns off and the timer flashes red?
If your Marantz Car Receiver suddenly turns off and the TIMER indicator flashes red (at 0.25 second intervals), the set is damaged. Turn off the power and contact a Marantz service center.
What to do if my Marantz Car Receiver turns off and the timer indicator flashes red?
If your Marantz Car Receiver suddenly turns off and the TIMER indicator flashes red (at 0.5 second intervals), it could be due to the protection circuit being activated by a rise in internal temperature or core wires of two speakers touching each other. Turn off the power, let the set cool down, and then turn it back on. Ensure the set is in a well-ventilated area. Also, unplug the power cord, twist the core wires tightly or terminate the speaker cables, and then reconnect.
General| Frequency range | 5 - 22000 Hz |
|---|---|
| Audio formats supported | AAC, FLAC, LPCM, MP3, WAV, WMA |
| Signal-to-Noise Ratio (SNR) | 90 dB |
| Total Harmonic Distortion (THD) | 0.05 % |
| RMS rated power | 120 W |
| FM band range | 87.5 - 108 MHz |
| Supported radio bands | AM, FM |
| Radio Data System (RDS) | Yes |
| Media types supported | CD, CD-R, CD-RW |
| Playback disc formats | CD audio |
| CD changer | No |
| Device type | HiFi CD player |
| Product color | Black |
| Number of decks | 1 deck(s) |
| Channels quantity | 2 channels |
| Disc loading type | Tray |
| Remote control type | RC009CR |
| Volume control | Rotary |
| Audio input | 3 |
| USB 2.0 ports quantity | 1 |
| Power consumption (standby) | 0.4 W |
| Power consumption (typical) | 50 W |
Weight and Dimensions| Depth | 280 mm |
|---|---|
| Width | 111 mm |
| Height | 302 mm |
| Weight | 4300 g |
To Next Page
