Need help?Do you have a question about the Marantz M-CR502 and is the answer not in the manual?
General| Brand | Marantz |
|---|---|
| Model | M-CR502 |
| Category | Car Receiver |
| Language | English |
Keep your purchase receipt as a permanent record for insurance or correspondence.
Consumer must establish proof of purchase for warranty service.
This undertaking is in addition to statutory consumer rights.
Verify that all included accessories are present after opening the box.
Guidance on proper disposal of product and battery materials according to local regulations.
Information on power and safety requirements for the Marantz product.
Notes on consent required for recording and playback of material.
Recommended locations to avoid for optimal performance and longevity.
Warning against placing any objects on top of the player.
Safety guidelines for handling the power cord to prevent damage or shock.
Instructions against user self-repair and recommendation for qualified technicians.
Important precautions regarding condensation, interference, and disc compatibility.
Step-by-step instructions for inserting batteries into the remote controller.
Important points and precautions when using and handling batteries.
Specifies the effective range for operating the unit with the remote controller.
Identification and description of controls and indicators on the front panel.
Explanation of the various indicators present on the unit's display panel.
Basic functions controllable via the remote for power, input selection, and volume.
Remote control functions specific to CD and USB playback modes.
Identification and description of terminals located on the rear panel of the unit.
Remote control operations for selecting preset channels and tuning stations.
Guide on how to properly connect speaker cables to the unit's terminals.
Procedure to configure speaker output settings for A and B terminals.
Instructions for connecting a powered subwoofer to the unit's audio output.
Instructions for connecting FM, DAB, and AM antennas for reception.
Details on connecting the provided FM, DAB, and AM antennas.
Step-by-step guide on how to assemble the AM loop antenna.
Advice for installing outdoor antennas for potentially improved reception.
How to connect and play music files from USB storage devices.
Connecting portable music players or other devices via AUX inputs.
Instructions for connecting headphones to the unit's headphone jack.
Steps for connecting the unit to a power outlet for operation.
How to turn the unit on and place it into standby mode.
Guide for playing music from a CD, including disc compatibility.
Steps to start CD playback and adjust the audio volume.
How to pause and resume playback of a CD.
How to stop playback of a CD.
How to advance to the next track during playback.
How to return to the beginning of the current or previous track.
How to quickly search within a track during playback.
Guide for tuning into AM and FM radio stations.
How the unit automatically scans and selects broadcast stations.
How to manually tune to a specific radio frequency.
How to play music files stored on a USB device.
How to listen to audio from external devices connected to AUX inputs.
Remote control operations for an iPod via the IS201 Music Junction.
Procedure for setting the internal clock of the unit.
Setting the wake-up timer to turn the unit on and play a source.
How to set the unit to automatically enter standby mode at a specified time.
Adjusting treble, bass, and left-right balance for sound customization.
How to adjust the brightness level of the unit's display panel.
Enabling low-power consumption mode for reduced energy usage.
Connecting devices for remote control operation with other Marantz units.
Configuring the remote control switch located on the rear panel.
Advanced playback features for CDs and USB devices.
How to play tracks from a CD or USB device in a random order.
Setting single track or all track repeat playback for CDs and USB files.
How to set a specific section for repeat playback within a CD track.
How to create a custom playback sequence for tracks on a CD or USB.
How to remove individual tracks or all tracks from a programmed sequence.
How to modify an existing programmed playback list.
How to cycle through display information during CD or MP3/WMA playback.
Details on the information displayed for MP3 and WMA music files.
Supported file formats, extensions, limitations, and recording recommendations.
Convenient functions for storing and accessing radio stations.
How to automatically scan and store broadcast stations (Auto Preset).
How to manually scan and store broadcast stations (Manual Preset).
How to select a previously stored broadcast station by its preset number.
How to recall stored stations by number or name.
How to erase individual or all stored broadcast stations.
Adjusting FM reception mode between Stereo and Mono for clarity.
Information about the RDS service and the types of data it provides.
How to automatically tune to FM stations that provide RDS service.
How to find RDS stations broadcasting a specific program type.
How to find RDS stations broadcasting traffic announcements.
How to enable or disable the display of Radio Text information.
How to automatically set the unit's clock time from RDS CT information.
How to cycle through different types of RDS information on the display.
Explanation of the DAB system, its services, and components.
How to tune into and listen to DAB radio stations.
How to select primary services that include secondary components.
How to select a secondary service from a primary service.
Accessing DAB setup options like Sort Mode, Auto Scan, Tuning Aid, DRC.
How to use the tuning aid feature to optimize antenna position for DAB.
Adjusting the Dynamic Range Control for received sound based on broadcast content.
How to manually store DAB broadcast stations.
How to recall a manually preset DAB station.
How to delete individual or all stored preset radio stations.
How to cycle through different types of DAB broadcast information.
Adjusting speaker output characteristics (Speaker A/B) for optimal sound.
How to connect speakers using bi-wiring for improved sound quality.
Configuring the unit's speaker output settings for bi-amping.
How to listen to music in different rooms using two pairs of speaker systems.
Configuring speaker output settings for multi-drive connections.
Adjusting the audio level balance between Speaker A and Speaker B.
How to reset the unit to its factory default settings.
Solutions for common issues like no power, low audio level, or incorrect function.
Troubleshooting issues related to the remote controller's functionality.
Solutions for problems encountered during CD and USB playback.
Solutions for issues like inability to select stations or poor FM reception.
Troubleshooting problems with audio output from external devices.
Detailed technical specifications and external dimensions of the unit.
Guidelines for carefully handling and cleaning discs to prevent damage.
Information on compatible disc formats that can be played by the unit.
Instructions for cleaning the exterior of the equipment using a soft cloth.
Information regarding warranty service, repairs, and contacting support.
To Next Page
