To Next PageTo Next PageWhat to do if Bluetooth interferes with medical devices on my Marantz NR1510 Stereo Receiver?
If Bluetooth communications from your Marantz Stereo Receiver may interfere with the operation of medical devices, turn off the power of this unit and any Bluetooth devices in sensitive locations. These locations include hospitals, trains, aircraft, petrol kiosks, areas where flammable gases are present, and near automatic doors and fire alarms.
General| Channels | 5.2 |
|---|---|
| Power Output | 50 W (8 ohms, 20 Hz - 20 kHz, 0.08% THD, 2ch driven) |
| Frequency Response | 10 Hz - 100 kHz |
| Input Sensitivity | 200 mV |
| Signal-to-Noise Ratio | 98 dB |
| HDMI Inputs | 6 |
| HDMI Outputs | 1 |
| HDMI 2.1 | No |
| 4K/60Hz Pass-Through | Yes |
| HDR Support | HDR10, HLG, Dolby Vision |
| eARC | Yes |
| Dolby Atmos | Yes |
| DTS:X | Yes |
| Audyssey MultEQ | Yes |
| Wi-Fi | Yes |
| Bluetooth | Yes |
| AirPlay 2 | Yes |
| HEOS Multi-Room | Yes |
| Voice Control | Amazon Alexa, Google Assistant, Apple Siri |
| Phono Input | Yes |
| Weight | 8.2 kg |
| Total Harmonic Distortion | 0.08% (20 Hz - 20 kHz) |
| Dimensions | 440 x 105 x 378 mm |
