What to do if the STANDBY indicator is blinking red after turning on Marantz NR1403?
If, after turning on your Marantz Stereo Receiver, the STANDBY indicator blinks red in approximately 0.5-second intervals, the unit's amplifier circuit has likely failed. Turn off the power and contact a Marantz service advisor.
Why my Marantz NR1403 power does not turn on?
If your Marantz Stereo Receiver doesn't turn on, first check if the power plug is properly inserted into the power outlet. If it is, the protection circuit might be active. Disconnect the power plug from the outlet, wait 5 to 10 seconds, and then plug it back in.
How to fix no audio output with HDMI connection on Marantz Stereo Receiver?
If you're experiencing no audio output with an HDMI connection on your Marantz Stereo Receiver, first check the connection of the HDMI connectors. If you want to output audio from the speakers, set “HDMI Audio Out” on the menu to “AVR”. If you want to output audio from a TV, set “HDMI Audio Out” on the menu to “TV.”
Why no sound is produced from subwoofer on Marantz Stereo Receiver?
If you're not getting any sound from the subwoofer connected to your Marantz Stereo Receiver, check the subwoofer connections and ensure the subwoofer is powered on. On the receiver's menu, set “Speaker Config.” – “Subwoofer” to “Yes.” Also, if “Front” and “Center” for “Speaker Config.” are set to “Large”, and “Subwoofer Mode” is set to “LFE”, no sound may be output from the subwoofers, depending on the input signal or selected sound mode.
How to output Dolby TrueHD, DTS-HD, Dolby Digital Plus audio on Marantz Stereo Receiver?
To output Dolby TrueHD, DTS-HD, or Dolby Digital Plus audio on your Marantz Stereo Receiver, use HDMI connections.
Why Audyssey MultEQ, Audyssey Dynamic EQ and Audyssey Dynamic Volume cannot be selected on Marantz NR1403?
If Audyssey MultEQ®, Audyssey Dynamic EQ® and Audyssey Dynamic Volume® cannot be selected on your Marantz Stereo Receiver, switch the sound mode to other than “DIRECT” or “PURE DIRECT.” Also, these features cannot be selected when headphones are used.
How to turn on display on Marantz NR1403?
If the display on your Marantz Stereo Receiver is off, set “Display” on the menu to something other than “Off.”
Why M-DAX cannot be selected on Marantz NR1403 Stereo Receiver?
If M-DAX cannot be selected on your Marantz Stereo Receiver, ensure that an analog signal or PCM signal (Sample rate=44.1/48 kHz) is input. M-DAX cannot be used for playback of multichannel signals like Dolby Digital or DTS surround. Also, switch the sound mode to something other than “DIRECT” or “PURE DIRECT.”
What to do if no video is output with HDMI connection on Marantz NR1403 Stereo Receiver?
If you're not getting any video output via HDMI on your Marantz Stereo Receiver, start by checking the HDMI connector's connection. Make sure the input source is correctly set to match the HDMI connector you're using. Also, verify that your TV is compatible with copyright protection (HDCP), as incompatible devices may prevent proper video output.
How to troubleshoot no picture on Marantz Stereo Receiver?
If no picture appears on your Marantz Stereo Receiver, check the connection between the video output terminal of the unit and the input terminal of your TV. Also, make sure the input settings on the TV match the input terminal connected to the unit.
General safety precautions, cautions, and warnings for safe operation and handling.
Compliance and notice for US customers regarding radio frequency.
A list of essential safety rules to read and follow for safe operation.
Covers warnings about heat, moisture, handling, and installation environment for safe use.
Initial steps for connecting and setting up the receiver for basic operation.
Introduction to advanced functions and operations for enhanced unit use.
Overview of the unit's capabilities and technological highlights.
List of items included in the product package.
Guidelines for safe handling, cleaning, and moving the unit to prevent damage.
Connecting devices via HDMI for optimal audio/video quality.
Connecting devices without HDMI using alternative methods.
Covers 3D video, ARC, and HDMI Control functions for enhanced connectivity.
Basic power management, source selection, and input management.
Instructions for adjusting master volume, muting, and volume level settings.
Playing audio/video from sources like discs and radio broadcasts.
How to choose desired sound modes for various audio playback experiences.
Automatic calibration using setup microphone for optimal acoustics.
Manual configuration of speaker settings and parameters.
Explanation of error messages and their corresponding solutions.
Solutions for common operational and connectivity issues.
How to access and use the on-screen menu for detailed settings.
Adjusting audio parameters like surround, tone, and equalizer.
Configuring HDMI output, volume display, and TV format.
Assigning, renaming, and selecting input sources.
Identification of front panel controls, indicators, and connectors.
Instructions for using the remote control and inserting batteries.
Detailed explanation of various surround sound playback modes.
Glossary of technical terms related to audio and video technologies.
Technical data and performance characteristics of the AV receiver.
Physical size and weight specifications of the AV receiver.
General safety precautions, cautions, and warnings for safe operation and handling.
Compliance and notice for US customers regarding radio frequency.
A list of essential safety rules to read and follow for safe operation.
Covers warnings about heat, moisture, handling, and installation environment for safe use.
Initial steps for connecting and setting up the receiver for basic operation.
Introduction to advanced functions and operations for enhanced unit use.
Overview of the unit's capabilities and technological highlights.
List of items included in the product package.
Guidelines for safe handling, cleaning, and moving the unit to prevent damage.
Connecting devices via HDMI for optimal audio/video quality.
Connecting devices without HDMI using alternative methods.
Covers 3D video, ARC, and HDMI Control functions for enhanced connectivity.
Basic power management, source selection, and input management.
Instructions for adjusting master volume, muting, and volume level settings.
Playing audio/video from sources like discs and radio broadcasts.
How to choose desired sound modes for various audio playback experiences.
Automatic calibration using setup microphone for optimal acoustics.
Manual configuration of speaker settings and parameters.
Explanation of error messages and their corresponding solutions.
Solutions for common operational and connectivity issues.
How to access and use the on-screen menu for detailed settings.
Adjusting audio parameters like surround, tone, and equalizer.
Configuring HDMI output, volume display, and TV format.
Assigning, renaming, and selecting input sources.
Identification of front panel controls, indicators, and connectors.
Instructions for using the remote control and inserting batteries.
Detailed explanation of various surround sound playback modes.
Glossary of technical terms related to audio and video technologies.
Technical data and performance characteristics of the AV receiver.
Physical size and weight specifications of the AV receiver.
General| Receiver type | - |
|---|---|
| Audio output channels | 9.1 channels |
| Signal-to-Noise Ratio (SNR) | 98 dB |
| Power output per channel (1KHz@6 Ohm) | 60 W |
| Power output per channel (20-20KHz@8 Ohm) | 50 W |
| HDMI in | 6 |
| Composite video in | 3 |
| Digital audio optical in | 1 |
| Connectivity technology | Wired |
| Speakers connectivity type | RCA |
| Ethernet LAN | No |
| Supported radio bands | AM, FM |
| Product color | Black |
| Audio decoders | Dolby Digital EX, Dolby Digital Plus, Dolby TrueHD |
| Apple docking compatibility | Not supported |
| Power consumption (standby) | 0.2 W |
| Power consumption (typical) | 180 W |
Weight and Dimensions| Depth | 367 mm |
|---|---|
| Width | 440 mm |
| Height | 105 mm |
| Weight | 8300 g |
To Next Page
