To Next PageTo Next Page
Need help?Do you have a question about the Marantz NR1609 and is the answer not in the manual?
General| Receiver type | Surround |
|---|---|
| Pre-out connectivity | Yes |
| Audio output channels | 7.1 channels |
| Signal-to-Noise Ratio (SNR) | 98 dB |
| Total Harmonic Distortion (THD) | 0.08 % |
| Power output per channel (1KHz@6 Ohm) | 90 W |
| Power output per channel (20-20KHz@8 Ohm) | 50 W |
| Display | - |
| Sample rate | 192 kHz |
| Aspect ratio | 21:9 |
| HDCP version | 2.2 |
| Product color | Black |
| Audio decoders | DTS-HD Master Audio, DTS:X, Dolby Atmos, Dolby Surround, Dolby TrueHD |
| Volume control | Rotary |
| HDMI in | 8 |
| Composite video in | 3 |
| Digital audio optical in | 1 |
| Component video (YPbPr/YCbCr) in | 2 |
| Connectivity technology | Wired & Wireless |
| Audio formats supported | AAC, ALAC, DSD, FLAC, MP3, WAV, WMA |
| Supported radio bands | FM, MW |
| Internet radio services supported | Amazon Music, Deezer, JUKE, Napster, Spotify, Tidal, TuneIn |
| Supported video modes | 480i, 576i, 1080p |
| Supported graphics resolutions | 3840 x 2160 |
| Power consumption (standby) | 0.2 W |
| Power consumption (typical) | 250 W |
Weight and Dimensions| Depth | 376 mm |
|---|---|
| Width | 440 mm |
| Height | 173 mm |
| Weight | 8300 g |
Essential safety instructions, handling of sensitive components, and notes for schematic diagrams.
Accessing online parts lists, serial numbers, and post-service initialization.
Detailed circuit schematics for various functional blocks like HDMI, DSP, CPU.
Layout diagrams for Digital, F HDMI, AV, Speaker, Side CNT, AMP, Front, MC HP, USB, REG, Front CNT, and SMPS boards.
Signal level diagrams for Front, Surround, Subwoofer, and Zone 2 audio channels.
Functional block diagrams for Analog Audio, Digital Audio, Video, and Power systems.
Diagram illustrating interconnections between major PCBs and components.
Pin functions and block diagrams for key semiconductors and ICs.
List of remote control commands for power, volume, source, and mode selections.
Procedures for accessing special modes like Version Display, Protection History, and HDMI Diagnostics.
Function to confirm problem paths and check video/audio circuits.
Step-by-step instructions for disassembling the unit's components.
Visual representation of all parts with their reference numbers.
Diagrams illustrating how the unit is packed for shipping.
Guides for diagnosing and resolving issues like power, audio, video, and connectivity problems.
Detailed procedures for diagnosing HDMI input/output and connectivity issues.
Steps for updating firmware via USB or OTA, and handling error codes.
