To Next Page
A
Alexander SmithSep 12, 2025
How to turn on display on Marantz NR1403?
- GGregory MooreSep 12, 2025
If the display on your Marantz Stereo Receiver is off, set “Display” on the menu to something other than “Off.”
How to turn on display on Marantz NR1403?
If the display on your Marantz Stereo Receiver is off, set “Display” on the menu to something other than “Off.”
What does it mean if the STANDBY indicator is blinking red in intervals of approximately 2 seconds on Marantz Stereo Receiver?
If the STANDBY indicator on your Marantz Stereo Receiver is blinking red approximately every 2 seconds, the protection circuit is likely activated due to a temperature rise within the unit. Turn off the power, allow the unit to cool down sufficiently, and then re-apply power. Also, ensure the unit is installed in a location with good ventilation.
What does it mean if STANDBY indicator is blinking red in intervals of approximately 0.5 seconds on Marantz NR1403 Stereo Receiver?
If the STANDBY indicator on your Marantz Stereo Receiver is blinking red approximately every 0.5 seconds, it could be due to speaker impedance issues. Ensure you are using speakers with the specified impedance. Alternatively, the protection circuit might have been activated because the speaker cable core wires are touching, a core wire has come loose from the terminal, or a core wire is touching the rear panel of the unit. Unplug the power cord, then firmly re-twist the core wire or secure the terminal, and reconnect the wire.
What to do if no picture appears on Marantz Stereo Receiver?
If no picture appears when using your Marantz Stereo Receiver, check the connection between the video output terminal of the unit and the input terminal of the TV. Also, ensure that the input settings are correctly matched to the input terminal of the TV connected to the unit.
What to do if audio is not output from my Marantz Stereo Receiver?
If audio is not output from your Marantz Stereo Receiver, please verify the connections for all devices, speaker connections, and configurations. Ensure the audio device is powered on, the master volume is appropriately adjusted, and mute mode is off. Check the connection with the playback device and select the correct input source, matching the input mode to the assigned digital input terminal. Also, disconnect any headphones, as this will prevent sound from the speakers.
Why does my Marantz NR1403 Stereo Receiver automatically switch to standby mode?
Your Marantz Stereo Receiver might be automatically switching to standby mode because the sleep timer is set. Turn the power back on or adjust the sleep timer settings. Alternatively, the “Auto Standby” feature may be enabled, which is triggered when no commands are received for a certain time. You can disable this by setting “Auto Standby” to “Off” in the menu.
What to do if no video is output with HDMI connection on Marantz NR1403 Stereo Receiver?
If you're not getting any video output via HDMI on your Marantz Stereo Receiver, start by checking the HDMI connector's connection. Make sure the input source is correctly set to match the HDMI connector you're using. Also, verify that your TV is compatible with copyright protection (HDCP), as incompatible devices may prevent proper video output.
What to check if no sound is produced from surround speaker on Marantz NR1403 Stereo Receiver?
If no sound is produced from the surround speakers on your Marantz Stereo Receiver, check if the surround speakers are connected to the SURROUND terminals.
How to troubleshoot no picture on Marantz Stereo Receiver?
If no picture appears on your Marantz Stereo Receiver, check the connection between the video output terminal of the unit and the input terminal of your TV. Also, make sure the input settings on the TV match the input terminal connected to the unit.
What to do if there is no audio output from Marantz Stereo Receiver?
If your Marantz Stereo Receiver isn't producing any audio, begin by checking all device connections and speaker configurations. Ensure the audio device is powered on, the master volume is adjusted appropriately, and mute mode is canceled. Verify the connection with the playback device and select the correct input source. Match the input mode to the assigned digital input terminal. Also, remember that no sound will come from the speakers if headphones are connected, so disconnect them.
General safety precautions, cautions, and warnings for safe operation and handling.
Compliance and notice for US customers regarding radio frequency.
A list of essential safety rules to read and follow for safe operation.
Covers warnings about heat, moisture, handling, and installation environment for safe use.
Initial steps for connecting and setting up the receiver for basic operation.
Introduction to advanced functions and operations for enhanced unit use.
Overview of the unit's capabilities and technological highlights.
List of items included in the product package.
Guidelines for safe handling, cleaning, and moving the unit to prevent damage.
Connecting devices via HDMI for optimal audio/video quality.
Connecting devices without HDMI using alternative methods.
Covers 3D video, ARC, and HDMI Control functions for enhanced connectivity.
Basic power management, source selection, and input management.
Instructions for adjusting master volume, muting, and volume level settings.
Playing audio/video from sources like discs and radio broadcasts.
How to choose desired sound modes for various audio playback experiences.
Automatic calibration using setup microphone for optimal acoustics.
Manual configuration of speaker settings and parameters.
Explanation of error messages and their corresponding solutions.
Solutions for common operational and connectivity issues.
How to access and use the on-screen menu for detailed settings.
Adjusting audio parameters like surround, tone, and equalizer.
Configuring HDMI output, volume display, and TV format.
Assigning, renaming, and selecting input sources.
Identification of front panel controls, indicators, and connectors.
Instructions for using the remote control and inserting batteries.
Detailed explanation of various surround sound playback modes.
Glossary of technical terms related to audio and video technologies.
Technical data and performance characteristics of the AV receiver.
Physical size and weight specifications of the AV receiver.
General| Receiver type | - |
|---|---|
| Audio output channels | 9.1 channels |
| Signal-to-Noise Ratio (SNR) | 98 dB |
| Power output per channel (1KHz@6 Ohm) | 60 W |
| Power output per channel (20-20KHz@8 Ohm) | 50 W |
| HDMI in | 6 |
| Composite video in | 3 |
| Digital audio optical in | 1 |
| Connectivity technology | Wired |
| Speakers connectivity type | RCA |
| Ethernet LAN | No |
| Supported radio bands | AM, FM |
| Product color | Black |
| Audio decoders | Dolby Digital EX, Dolby Digital Plus, Dolby TrueHD |
| Apple docking compatibility | Not supported |
| Power consumption (standby) | 0.2 W |
| Power consumption (typical) | 180 W |
Weight and Dimensions| Depth | 367 mm |
|---|---|
| Width | 440 mm |
| Height | 105 mm |
| Weight | 8300 g |
