Marantz NR1403 - Explanation of Terms

86
Surround
Sound Mode (vpage38)
Tone
z8
(vpage60)
Audyssey
z9
(vpage61)
M-DAX
z11
(vpage60)
MultEQ
®
(vpage61)
Dynamic EQ
®
z10
(vpage62)
Dynamic Volume
®
z10
(vpage62)
DIRECT/PURE DIRECT (2channel)
z1
DIRECT/PURE DIRECT (Multi-channel)
z1
STEREO
S S S S S
MULTI CH IN
S S S S
DOLBY PRO LOGIC g S S S S S
DOLBY PRO LOGIC
S S S S S
DOLBY DIGITAL
S S S S
DOLBY DIGITAL Plus
S S S S
DOLBY TrueHD
S S S S
DTS NEO:6
S S S S S
DTS SURROUND
S S S S
DTS 96/24
S S S S
DTS-HD
S S S S
DTS Express
S S S S
MULTI CH STEREO
S S S S S
VIRTUAL
S S S S S
z1 During playback in PURE DIRECT mode, the surround parameters are the same as in DIRECT mode.
z8 This item cannot be set when “Dynamic EQ
®
” (vpage62) is set to “On”.
z9 For HD Audio whose sampling frequency of an input signal is more than 96 kHz, this sound parameter cannot be set.
z10 This item cannot be set when “MultEQ
®
” (vpage61) is set to “Off” or “Manual EQ”.
z11 This item can be set when the input signal is analog, PCM 48 kHz or 44.1 kHz.