How to troubleshoot no video output with HDMI connection on Marantz NR1403?
If no video is output with an HDMI connection on your Marantz Stereo Receiver, check the connection of the HDMI connectors. Also, ensure the input source matches the connected HDMI connector and that your TV is compatible with copyright protection (HDCP). If the TV isn't HDCP-compatible, the video might not output correctly.
Why no sound is produced from surround speaker on Marantz NR1403 Stereo Receiver?
If no sound is coming from the surround speakers connected to your Marantz Stereo Receiver, check that the surround speakers are connected to the SURROUND terminals.
How to fix Marantz NR1403 Stereo Receiver that does not operate properly?
If your Marantz Stereo Receiver is not operating properly, try resetting the microprocessor.
Why the volume does not increase on Marantz NR1403?
If the volume on your Marantz Stereo Receiver isn't increasing as expected, the maximum volume might be set too low. Adjust the maximum volume under “Limit” in the menu. Also, make sure that the power for any external devices connected to the unit's output connectors is turned on.
Why no sound is produced from subwoofer on Marantz Stereo Receiver?
If you're not getting any sound from the subwoofer connected to your Marantz Stereo Receiver, check the subwoofer connections and ensure the subwoofer is powered on. On the receiver's menu, set “Speaker Config.” – “Subwoofer” to “Yes.” Also, if “Front” and “Center” for “Speaker Config.” are set to “Large”, and “Subwoofer Mode” is set to “LFE”, no sound may be output from the subwoofers, depending on the input signal or selected sound mode.
How to fix no audio output with HDMI connection on Marantz Stereo Receiver?
If you're experiencing no audio output with an HDMI connection on your Marantz Stereo Receiver, first check the connection of the HDMI connectors. If you want to output audio from the speakers, set “HDMI Audio Out” on the menu to “AVR”. If you want to output audio from a TV, set “HDMI Audio Out” on the menu to “TV.”
Why my Marantz NR1403 power does not turn on?
If your Marantz Stereo Receiver doesn't turn on, first check if the power plug is properly inserted into the power outlet. If it is, the protection circuit might be active. Disconnect the power plug from the outlet, wait 5 to 10 seconds, and then plug it back in.
General safety precautions, cautions, and warnings for safe operation and handling.
Compliance and notice for US customers regarding radio frequency.
A list of essential safety rules to read and follow for safe operation.
Covers warnings about heat, moisture, handling, and installation environment for safe use.
Initial steps for connecting and setting up the receiver for basic operation.
Introduction to advanced functions and operations for enhanced unit use.
Overview of the unit's capabilities and technological highlights.
List of items included in the product package.
Guidelines for safe handling, cleaning, and moving the unit to prevent damage.
Connecting devices via HDMI for optimal audio/video quality.
Connecting devices without HDMI using alternative methods.
Covers 3D video, ARC, and HDMI Control functions for enhanced connectivity.
Basic power management, source selection, and input management.
Instructions for adjusting master volume, muting, and volume level settings.
Playing audio/video from sources like discs and radio broadcasts.
How to choose desired sound modes for various audio playback experiences.
Automatic calibration using setup microphone for optimal acoustics.
Manual configuration of speaker settings and parameters.
Explanation of error messages and their corresponding solutions.
Solutions for common operational and connectivity issues.
How to access and use the on-screen menu for detailed settings.
Adjusting audio parameters like surround, tone, and equalizer.
Configuring HDMI output, volume display, and TV format.
Assigning, renaming, and selecting input sources.
Identification of front panel controls, indicators, and connectors.
Instructions for using the remote control and inserting batteries.
Detailed explanation of various surround sound playback modes.
Glossary of technical terms related to audio and video technologies.
Technical data and performance characteristics of the AV receiver.
Physical size and weight specifications of the AV receiver.
General| Receiver type | - |
|---|---|
| Audio output channels | 9.1 channels |
| Signal-to-Noise Ratio (SNR) | 98 dB |
| Power output per channel (1KHz@6 Ohm) | 60 W |
| Power output per channel (20-20KHz@8 Ohm) | 50 W |
| HDMI in | 6 |
| Composite video in | 3 |
| Digital audio optical in | 1 |
| Connectivity technology | Wired |
| Speakers connectivity type | RCA |
| Ethernet LAN | No |
| Supported radio bands | AM, FM |
| Product color | Black |
| Audio decoders | Dolby Digital EX, Dolby Digital Plus, Dolby TrueHD |
| Apple docking compatibility | Not supported |
| Power consumption (standby) | 0.2 W |
| Power consumption (typical) | 180 W |
Weight and Dimensions| Depth | 367 mm |
|---|---|
| Width | 440 mm |
| Height | 105 mm |
| Weight | 8300 g |
To Next Page
