o
i/p Scaler
Set the video input signal to be subjected to i/p Scaler processing.
i/p Scaler will convert the resolution of the input video signal to the
value set in “Resolution”. (v p. 172)
On: Use i/p Scaler function.
Off: Do not use i/p Scaler function.
0
This item can be set when “HDMI” is assigned for each input source.
0
This item can be set when “Video Mode” is set to anything other than
“Bypass”. (v p. 171)
0
This function is not effective when the input signal is “x.v.Color”, 3D, sYCC601
color, Adobe RGB color, Adobe YCC601 color or computer resolutions.
o
Resolution
Set the output resolution.
Auto
(Default):
The resolution supported by the TV
connected to the HDMI MONITOR OUT
connector is detected automatically and
the appropriate output resolution is set.
480p/576p / 1080i /
720p / 1080p /
4K / 8K :
Set the output resolution.
0
This item can be set when “i/p Scaler” is set to “On”. (v p. 172)
0
“480p/576p”, “1080i”, “720p” or “1080p” can be set for devices connected to
HDMI connectors 1 to 4.
Contents Connections Playback Settings Tips Appendix
172
Front panel Display Rear panel Remote Index
To Next Page
Loading...
