Need help?Do you have a question about the Marantz PM200 and is the answer not in the manual?
General| Total Harmonic Distortion | 0.05% |
|---|---|
| Input Sensitivity | 2.5mV (MM), 150mV (line) |
| Power Output | 20W per channel (8Ω) |
| Frequency Response | 10Hz to 60kHz |
| Speaker load impedance | 4Ω to 16Ω |
Troubleshooting steps for excessive power draw.
Troubleshooting steps for lack of power draw or zero bias.
Troubleshooting steps for elevated hum and noise.
Procedure for adjusting amplifier idling current.
List of required test equipment for performance verification.
Initial setup steps before performance testing.
Procedure for testing total hum and noise levels.
Procedure for testing maximum power output.
Procedure for testing harmonic distortion.
Schematic and component layout for the main assembly.
Schematic and component layout for the microphone amplifier.
Schematic and component layout for the loudness assembly.
Schematic and component layout for the switch assembly.
Schematic and component layout for the volume assembly.
Schematic and component layout for the tone assembly.
Exploded view and parts list for the front panel.
Technical specifications related to the audio output and frequency response.
General technical specifications including power, dimensions, and weight.
To Next Page
