EasyManuals Logo

Marantz PM5004 Specification

Marantz PM5004
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
PM5004
Integrated Amplifier
Looking for Marantz quality in a mid-sized integrated stereo amplifier? The PM5004 may be just what
you need. The perfect starter system for the music aficionado, this superb integrated amplifier excels as
a “second system” for a summer home, den, or dorm room. A Source Direct option bypasses all tone
controls for the purest possible signal while dual tape loops make easy work of recording. An all-
discrete output stage develops 45 watts per channel into 4 ohms for serious dynamic impact while a cur-
rent-feedback volume control insures ultra-low-noise performance. Styled to match the whole range of
Marantz components, the PM5004 delivers all the sonic excellence Marantz is known for in an attrac-
tive, easy-to-use package.

Sophisticated Aluminum/Glass-reinforced resin hybrid front panel

Discrete-component amplifier with current feedback amplifier circuit

Input buffer circuit for High S/N & Ch. Separation

Source Direct switch

Fully discrete, MM phono stage

Active Filter type Tone Control, Loudness

5 line-level inputs; 2 Record outputs

Transparent screw-type A/B binding posts

Triple command code sets; IR flasher input

IEC320 C18&C17(2pin) type AC inlet w/Detachable Power-cord

2 switched / 1 unswitched AC outlets

System remote controller

Available Option Rack Mount Kit RMK5003PCD

Other manuals for Marantz PM5004

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Marantz PM5004 and is the answer not in the manual?

Marantz PM5004 Specifications

General IconGeneral
Damping factor100
Amplifier class-
Frequency range10 - 50000 Hz
Input sensitivity200 mV
Audio output channels2.0 channels
Peak power per channel- W
Signal-to-Noise Ratio (SNR)85 dB
Total Harmonic Distortion (THD)0.0001 %
Dynamic power per channel (4 Ohm)60 W
Dynamic power per channel (8 Ohm)45 W
RMS power output per channel (4 Ohm)55 W
RMS power output per channel (8 Ohm)40 W
Bridge-mode power output per channel (4 Ohm)80 W
AC (power) inYes
Audio (L/R) in6
Audio (L/R) out2
Headphone outputs1
Speakers connectivity typeRCA
PurposeHome
Product colorBlack
Connectivity technologyWired
Power consumption (standby)0.4 W
Power consumption (typical)110 W
Weight and Dimensions IconWeight and Dimensions
Depth369 mm
Width440 mm
Height105 mm
Weight6700 g

Related product manuals