Need help?Do you have a question about the Marantz PM5005 and is the answer not in the manual?
General| Damping factor | 100 |
|---|---|
| Amplifier class | - |
| Frequency range | 10 - 50000 Hz |
| Input sensitivity | 200 mV |
| Audio output channels | 2.0 channels |
| Peak power per channel | 40 W |
| Signal-to-Noise Ratio (SNR) | 102 dB |
| Total Harmonic Distortion (THD) | 0.05 % |
| Dynamic power per channel (4 Ohm) | 60 W |
| Dynamic power per channel (8 Ohm) | 45 W |
| RMS power output per channel (4 Ohm) | 55 W |
| AC (power) in | Yes |
| Audio (L/R) in | 6 |
| Audio (L/R) out | 2 |
| Headphone outputs | 1 |
| Purpose | Home |
| Product color | Silver |
| Volume control | Rotary |
| Connectivity technology | Wired |
| AC input voltage | 230 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 0.3 W |
| Power consumption (typical) | 110 W |
Weight and Dimensions| Depth | 370 mm |
|---|---|
| Width | 440 mm |
| Height | 105 mm |
| Weight | 6700 g |
Details on the amplifier's sound quality, including its discrete current feedback amplifier.
Features like tone control and the LOUDNESS function for enhanced audio.
Overview of audio and remote connector cables required for connecting devices.
Instructions for connecting speaker cables, including impedance and polarity.
Guide to connecting two sets of speakers to the unit's SPEAKER A and B terminals.
Steps for bi-wiring speakers to enhance sound by separating frequency ranges.
How to connect turntables, tuners, CD players, and network audio players.
Guidance on connecting external recording devices for audio output.
Connecting external IR receivers or other Marantz devices for remote operation.
Procedure for safely connecting the amplifier to the household power outlet.
Steps for turning the unit on, off, and switching to standby mode.
How to choose speaker output systems and input sources for audio.
Adjusting volume, muting sound, and fine-tuning bass, treble, and balance.
Instructions for playing CDs, including Source Direct and Loudness modes.
How to output audio to an external recording device.
Setting the unit to automatically enter standby mode when idle.
Enabling or disabling the unit's ability to receive remote control signals.
Setting remote control codes for multi-unit operation or independent device control.
Procedures to assign unique remote control codes to the unit and its remote.
Guidance on using BASS, TREBLE, and BALANCE controls for desired sound.
Tips for faithful playback and clear audio at low volume levels.
Operating other Marantz devices and managing multiple units simultaneously.
Solutions for power failure, auto standby, and flashing power indicators.
Troubleshooting steps when the remote control unit fails to operate the amplifier.
Diagnosing and resolving problems where no sound is produced by the speakers.
Addressing issues with missing audio channels or distorted sound quality.
Solutions for static, humming, or audio interruptions during playback.
Explanation of AC resistance value (Ohms) and its impact on power.
Understanding Source Direct for bypassing tone circuits and enhancing fidelity.
Description of the circuit designed to protect the unit from abnormalities.
To Next Page
