Marantz PM5005 User Manual

.
VOLUME
SOURCE
DIRECT
AMP POWER
MUTE
X
df
Input source
select buttons
.
VOLUMEBALANCETREBLEBASS
SPEAKERS
A/B
INPUT
SELECTOR
LOUDNESS
X
SOURCE
DIRECT
Turning the power on
1
Press X on this unit to turn the power on.
Input indicator for the selected source lights.
0
Press AMP POWER X to turn on power from standby mode.
0
You can turn the INPUT SELECTOR when the unit is in standby mode to turn on
the power.
NOTE
Turn VOLUME on this unit to adjust the volume to the lowest level before turning on
the power.
o
Turning the power off
1
Press X on this unit to turn the power off.
All lit indicators turn off.
o
Switching the power to standby
1
Press AMP POWERX on the remote control.
The standby indicator lights in red.
Contents Connections Playback Settings Tips Appendix
25
Front panel Rear panel
Remote control
unit
Index

Marantz PM5005 Specifications

General

Damping factor	100
Amplifier class	-
Frequency range	10 - 50000 Hz
Input sensitivity	200 mV
Audio output channels	2.0 channels
Peak power per channel	40 W
Signal-to-Noise Ratio (SNR)	102 dB
Total Harmonic Distortion (THD)	0.05 %
Dynamic power per channel (4 Ohm)	60 W
Dynamic power per channel (8 Ohm)	45 W
RMS power output per channel (4 Ohm)	55 W
AC (power) in	Yes
Audio (L/R) in	6
Audio (L/R) out	2
Headphone outputs	1
Purpose	Home
Product color	Silver
Volume control	Rotary
Connectivity technology	Wired
AC input voltage	230 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.3 W
Power consumption (typical)	110 W

Weight and Dimensions

Depth	370 mm
Width	440 mm
Height	105 mm
Weight	6700 g