Marantz PM7005 Quick Start Guide

4
2
Connect the speakers to the amplifier
(R)
wq
(L)
wq
Connecting the speaker cables
q Peel off about 3/8 inch (10 mm)
of sheathing from the tip of the
speaker cable, then either twist
the core wire tightly or apply
solder to it.
w Turn the speaker terminal
counterclockwise to loosen it.
e Insert the speaker cable’s core
wire to all the way into the
speaker terminal.
r Turn the speaker terminal
clockwise to tighten it.

Marantz PM7005 Specifications

General

Damping factor	100
Amplifier class	-
Frequency range	5 - 100000 Hz
Input sensitivity	200 mV
Audio output channels	2.0 channels
Peak power per channel	40 W
Signal-to-Noise Ratio (SNR)	104 dB
Total Harmonic Distortion (THD)	0.02 %
AC (power) in	Yes
Audio (L/R) in	5
USB 2.0 ports quantity	1
Speakers connectivity type	Clamp terminals
Purpose	Home
Product color	Gold, Silver
Volume control	Rotary
Cables included	AC
Connectivity technology	Wired
Power consumption (standby)	0.2 W
Power consumption (typical)	170 W

Weight and Dimensions

Depth	379 mm
Width	440 mm
Height	125 mm
Weight	10000 g